Analysa Lite tempterature control system

Analysa Lite System

Features and Benefits

The LTS350 is an easy to use versatile heating and freezing stage, with simple microscope slide mounted sample loading. The Analysa systems are optimised for isothermal sample analysis applications where high speed heating and cooling are compromised by larger sample area with excellent thermal stability of less than 0.1C.

The stage consists of a large area temperature controlled element with a platinum resistor sensor embedded close to the surface for accurate temperature measurements. To minimise the thermal gradient across the sample, the light aperture in the block is only 2.5mmØ

The temperature is controlled by the TP94 controller which has a simple single line display and one ramp program consisting of a limit temperature and the rate of heating/cooling, limit holding time is 999 minutes or when exit button is pressed.

The Analysa Lite system is designed for those who require a basic temperture control microscopy system but refuse to compromise on temperature stablility.

Download Product Data for Entire Analysa Range

More information about working distances can be found on the Optical Accessories page

Specifications

• Temperature Range -196°C to 350 °C
• Sample area of 38 mm x 62 mm
• 1 ramp temperature profile programming
• No PC required
• 15mm by 15mm X, Y manipulation as standard
• Sample holder for standard 76 by 26mm microscope slides
• Gas tight chamber for atmospheric control
• Swing out lid for easy sample loading
• Can be used with transmitted or reflected light
• Mounts directly to microscope table or substage
• Stage body size - 160 x 80 x 24 mm
• 100 ohm platinum sensor 1/10th din standard class A
• Temperature stability < 0.1°C
• Inner lid to increase temperature stability
• Direct injection of coolant into block
• Highly conductive metal for improved heat transfer
• Maximum heating / cooling rate of 30°C/min
• Response time of <1 second at 5°C/min at 50°C
• Objective lens minimum working distance 6mm
• Condenser lens minimum working distance 13.2

Examina Computer Ready system includes:

LTS350 stage

TP94 computer interface controller

Linksys temperature programming software

All necessary cables

Cooling option required to extend range to -196°C

LTS-LNP94/2 automated liquid nitrogen cooling pump
LTS-LNP94/1 manual control liquid nitrogen cooling pump