LTS420 Specifications

  • Temperature Range -196°C to 420°C
  • Sample area of 53.5x43mm
  • 100 Ramp temperature profile programming
  • 15mm XY manipulation as standard
  • Sample holder for standard 76x26mm microscope slides
  • Quick-release gas valves for atmospheric control
  • Swing out lid for easy sample loading
  • Can be used with transmitted or reflected light
  • Mounts directly to microscope table or substage
  • Stage body size: 166x90x24mm
  • 100 Ohm platinum sensor
  • Temperature stability <0.1°C
  • Inner lid to increase temperature stability
  • Direct injection of coolant into block
  • Highly conductive metal for improved heat transfer
  • Minimum Heating Rate 0.01°C/min
  • Maximum heating rate of 50°C/min 
  • Response time of <1 second at 5°C/min at 50°C
  • Objective lens minimum working distance: 6.5mm
  • Condenser lens minimum working distance: 13.2mm

If you are using a light microscope, please go to the STAGE CLAMPS section to check your microscope is compatible.

If you are using transmitted light please go to the CONDENSER EXTENSION LENS section for condenser info.