MDS600 Specifications

  • Temperature Range -196°C to 600 °C
  • Heating and cooling rates of 0.01 to 150°C/min
  • PC control using LINK software
  • Positional resolution of motors 0.05µm
  • Position repeatability <3um
  • 150 X,Y coordinates can be stored
  • Max. 15mm motorized X,Y travel
  • Manual & PC operation
  • Definable sample scan area
  • Sample vibration eliminated over entire range of speeds
  • Ventilated bottom window to eliminate condensation
  • Novel low profile lid design for rapid lens change
  • Extremely efficient use of liquid nitrogen
  • Mounts directly on microscope substage using stage-clamps
  • Objective lens working distance - 4.9mm
  • Condenser lens minimum working distance 12.7
  • Light aperture - 1.3mm Ø for accurate sample temperatures
  • Optional lid and cooling jacket for high magnification lenses

If you are using a light microscope, please go to the STAGE CLAMPS section to check your microscope is compatible.

If you are using transmitted light please go to the CONDENSER EXTENSION LENS section for condenser info.