Linkam Scientific Instruments. Leaders in heating, cooling and freezing microscope stages.

Examina Vacuum System

Temperature programmers Heating and Freezing Microscope Stages Cooling Systems
Complete Systems
Heating and Cooling Stages
Software
Image Capture
Warm Microscope Stages
Optical Accessories
Microscope Stage Clamps
Custom Projects
What's New
Contact us
About Us
Site Map
Back to Specific Applications

Examina Vacuum System

Features and Benefits

Based upon the proven low pressure and temperature control technology developed for the Freeze Drying System (FDCS196), Linkam has modified the stage body and temperature control element to extend the temperature range from -196C up to 350C at a vacuum of 10-3mbar using a simple 1.5L rotary vacuum pump.

It is now possible to carry out ultra low temperature experiments with virtually no gas or air contamination of the sample. By substituting a vacuum port for a gas valve it is also possible to first pull a vacuum and then bleed in the desired gas.

A prirani gauge can be supplied to relay the sample chamber pressure to either the Linksys 32 software or the display panel on the TMS94 temperature programmer.

By connecting the vacuum pump to the MV196 motorized valve, pressure can be quickly and accurately varied utilizing simple on screen software controls.

Contact Linkam to discuss your requirements.

The temperature is programmed by the standalone TMS94 temperature programmer. Sophisticated temperature profiles of up to 32 ramps can be set up with ranges of heating rates from 0.1C/min to 30C/min.

The TMS94 can be used as a standalone programmer or connected via RS232 to PC enabling use of further features within the Linksys 32 software.

TMS94 firmware can be updated via email using the RS232 connection.

Tungsten probe

Motorized Valve System (MV196)

Specifications

  • Temperature Range -196°C to 350 °C
  • Sample area of 22mm diameter
  • 32 ramp temperature profile programming
  • No PC required (unless using motorized valve)
  • Vacuum tested to 10-3mbar
  • Can be used with transmitted or reflected light
  • Mounts directly to microscope table or substage
  • Stage body size - 160 x 80 x 24 mm
  • 100 ohm platinum sensor 1/10th din standard class A
  • Temperature stability < 0.1°C
  • Direct injection of coolant into block
  • Highly conductive metal for improved heat transfer
  • Maximum heating / cooling rate of 30°C/min
  • Response time of <1 second at 5°C/min at 50°C
  • Objective lens minimum working distance 4.5mm
  • Condenser lens minimum working distance 13.2

Examina Vacuum System Includes:

THMS350V stage with 2 standard NW16 flange type vacuum ports.

TMS94 32 ramp temperature programmer

All necessary cables

OPTIONAL EXTRAS

*Cooling option required to extend range to -196°C

THMS-LNP94/2 automated liquid nitrogen cooling pump
THMS-LNP94/1 manual control liquid nitrogen cooling pump

Motorized Valve MV196 to control vacuum from Linksys 32 software

Vacuum Pump and vacuum tubing

Linksys 32 Software

Digital Image capture Software and Camera

 

[Complete Systems] [System Products] [Software] [Image Capture] [Warm Microscope Stages] [Optical Accessories] [Custom Projects] [What's New] [Contact Us] [About Us] [Site Map]

Linkam Scientific Instruments Ltd · (+44)(0) 1737 363 476. FAX (+44)(0) 1737 363 480

© Copyright, 2007 Linkam Scientific Instruments, All Rights Reserved.

Unauthorized use of any content contained herein is strictly prohibited.