Examina Pressure System

Examina Pressure System

Features and Benefits

Similar in performance to the standard Examina range of heating and freezing stages, the Examina Pressure Stage utilizes a stainless steel reinforced base plate, reinforced lid and base inserts and 1mm thick glass windows to enable pressurizing the sample chamber up to 14bar.

A manually operated digital display pressure pump can be purchased as an option with the stage.

Contact Linkam to discuss your requirements.

The temperature is programmed by the standalone TMS94 temperature programmer. Sophisticated temperature profiles of up to 32 ramps can be set up with ranges of heating rates from 0.1C/min to 130C/min (depending on pressure).

The TMS94 can be used as a standalone programmer or connected via RS232 to PC enabling use of further features within the Linksys 32 software.

TMS94 firmware can be updated via email using the RS232 connection.

Motorized Valve System (MV196)

Specifications at 14bar

• Temperature Range -120°C to 500 °C
• Sample area of 22mm diameter
• 32 ramp temperature profile programming
• No PC required
• Pressure tested to 14bar
• Can be used with transmitted or reflected light
• Mounts directly to microscope table or substage
• Stage body size - 160 x 80 x 24 mm
• 100 ohm platinum sensor 1/10th din standard class A
• Temperature stability < 0.1°C
• Direct injection of coolant into block
• Highly conductive metal for improved heat transfer
• Maximum heating of 130°C/min
• Response time of <1 second at 5°C/min at 50°C
• Objective lens minimum working distance 6.6mm
• Condenser lens minimum working distance 14.5mm

Examina Pressure System Includes:

THMS600PS stage

TMS94 32 ramp temperature programmer

All necessary cables

OPTIONAL EXTRAS

*Cooling option required to extend range to -196°C

THMS-LNP94/2 automated liquid nitrogen cooling pump
THMS-LNP94/1 manual control liquid nitrogen cooling pump

Manually operated digital display pressure pump

Linksys 32 Software

Digital Image capture Software and Camera