NEXUS system Control and Image Capture Software

Take control of your experiment. 

Linkam’s NEXUS software for Windows is a new software offering that replaces LINK. At launch it will support the THMS / HFS / LTS / TS / HS / CCR and PE families of our stages, with others being added all the time.

Designed for use with our T95 and T96 controllers, NEXUS offers a wide range of modules including Reporting, Image Capture, Extended Measurements, TASC (Thermal Analysis by Surface Characterisation) and 21 CFR 11. 

Why NEXUS?

  • Live display of current status for easy monitoring

  • Full control of heating and cooling rates, limit and hold time with unlimited ramps

  • Ability to cycle a set of ramps for a specified number of times

  • Row-by-row control of vacuum and humidity, synchronised with temperature

  • Full five-point temperature calibration

  • Trigger I/O for synchronisation with other equipment

  • The ability to hold a ramp until non-temperature conditions are met, such as vacuum or RH level

  • Real-time chart of temperature and other measured parameters

  • Automatic setup of controls and parameter limits based on stage type connected

  • Data export to CSV and Excel .XLS

  • Tools to compare data-runs

  • The ability to rewind and review data while recording

  • Docking environment to customise the screen layout

  • Multiple themes for a better user experience

  • USB and RS232 communication (RS232 requires optional T95 and T96 communications card)

  • Optional modules including Imaging Systems with high performance cameras

  • Native 64 bit application for Windows 10 and 11

  • SDK available for integration into 3rd party application

To get more out of your Linkam stage, add one of the NEXUS Imaging Systems to automatically record images of your sample during your experiment. Adding imaging to your system greatly enhances its capabilities allowing you to directly monitor and analyse changes to the physical characteristics of your material, such as colour, size and shape. 

Upgrade

If you have a T95 or T96 controller and are currently using LINK why not upgrade to NEXUS?
All your LINK data can also be imported into NEXUS ensuring continuity of data. 

Contact Linkam or your local Linkam distributor for more information on how to upgrade your LINK software to NEXUS.

      Click here to open the quote request form                 Click here to open the quote request form